Model Number: OP-SG06 Converter-#2869
Brand Name: OPTOSTAR
Key Specifications/Special Features:
Description:SG06 6 ports Gigabit Ethernet switch has four 10/100/1,000M UTP ports and two 1,000M SFP socketsCustomer can choose different 1,000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX and moreThe product is possessed of stable performance with adopting latest IC from USAIt is applicable to used in constructing of optical fiber Ethernet
Specifications:
- 2 x 1,000M SFP + 4 x 10/100/1000M RJ45 ports
- UTP: RJ45, 10/100/1,000Mbps
- SFP slot: 1,000Mbps
- MM: 850/1,310nm
- SM: 1,310/1,550nm
Features:
- 6-port 10/100/1,000Mbps GB Ethernet switch
- Four 10/100/1,000M UTP ports and two 1,000M SFP ports
- Auto negotiation function supports UTP ports to auto 10/100/1,000M and full duplex/half duplex
- Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
- The SFP slot supports 1,000M and full duplex mode
- Supports IEEE 802.3x flow control and broadcast storm protection
- Supports VLAN and QoS
- Supports maximum 10KB frame
- It is low-power consume (4W), low-heat, and good reliability
Technical parameters:
- Operating standards: IEEE802.3/u/z/ab, 10/100/1000Base-T and 1000Base-SX/LX
- Apples' Mac address table: 1K
- Frame buffer memory: 1MKB
- Switching capacity: 12GB
- Connector:
- UTP:
- RJ45: 10/100/1,000Mbps
- SFP slot: 1,000Mbps
- Cable: UTP: Cat5 or 6 UTP (the maximum distance up to 100m)
- Multi-mode fiber: 50/125, 62.5/125μm (the maximum distance up to 224/550m)
- Single mode fiber: 8/125, 8.7/125, 9/125μm (the maximum distance up to 10 to 100km)
- Flow control:
- Full duplex: IEEE802.3x
- Half duplex: back pressure
- LED: PWR, F1 Link/Act, F2 Link/Act, TP1 to TP4 Link/Act, TP1 to TP4 100, TP1 to TP4 1000
- Power requirement: 220V AC (100 to 240V), 50 to 60Hz, 5V DC, 2A
- Ambient temperatures: 0 to 50°C
- Storage temperatures: -20 to 70°C
- Humidity range: 5 to 90% RH
- Dimensions (H x W x L): 30 x 140 x 100mm
By certification [File Integrity]
